JENN-AIR
®
DETAILED PLANNING DIMENSIONS
3 of 3
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air
®
appliances are appropriately UL, CUL or CSA approved. 8494BdZw615
OPENING/CLEARANCE DIMENSIONS
BACK VIEW
A A
B
C
D
E
F
G
J
H
I
C
L
K
L
K
M
N
O
125º125º
H
I
72" COUNTER-DEPTH FRENCH DOOR REFRIGERATOR WITH INTERNAL DISPENSER
JFC2290RT – 35
5
⁄8" x 71
7
⁄8" x 28
1
⁄8" (depth with custom door)
w
e
D
A
B
B
C
F
G
E
MODEL # JFC2290RT
in cm
A
Width (min.) 36
5
⁄8 93.0
B
Minimum width from side of refrigerator
to fixed wall – door open 90° (full access
to remove bins)
2
1
⁄4* 5.7*
Minimum width from side of refrigerator
to fixed wall – door fully open 125°
10 25.4
C
Width of recommended electrical/
water installation area
34 86.4
D
Height (min.) 71
7
⁄8 182.6
E
Height of recommended electrical
installation area (min.-max.)
10-
24
25.4-
61.0
F
Height of recommended water
installation area
10 25.4
G
Depth of recommended water
installation area
1 2.5
H
Water line location – distance from side 24
5
⁄8 62.5
I
Water line location – distance
from bottom
9
3
⁄8 23.8
e
Recommended electrical connection location
w
Recommended water connection location
*Dimension may increase or decrease depending on depth of handle.
ELECTRICAL REQUIREMENTS
115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded circuit is required.
A dedicated circuit is recommended. Use an outlet that cannot be turned
off by a switch.
Minimum length of power cord is 60" (152.0 cm). Do not use an
extension cord.
WATER PRESSURE REQUIREMENTS
A cold water supply with water pressure between 30 and 120 psi (207 and
827 kPa) is required to operate the water dispenser and ice maker. Call a
licensed, qualified plumber with any questions about the water pressure.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water coming out of a reverse osmosis
system going to the water inlet valve of the refrigerator needs to be
between 30 and 120 psi (207 and 827 kPa).
If a reverse osmosis water filtration system is connected to the cold water
supply, the water pressure to the reverse osmosis system needs to be a
minimum of 40 to 60 psi (276 to 414 kPa).
FRONT VIEW
(56 pages)
(140 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals