Jenn-Air Range SEG196 User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 51
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
Stainless Steel Areas
The top of the range (the trim area around the burner basin areas), is made of
stainless steel.
To clean light soil, wipe with soapy cloth or nonabrasive cleanser, such as Soft
'_ Scrub. Rinse, buff with soft cloth; polish with glass cleaner if necessary.
To clean moderate soil or discoloration of the surface (excessive heat will cause
a golden discoloration), clean with Zud, Bar Keepers Friend, or Luneta (Jenn-
Air Model A912, Part No. 712191). With a sponge or cloth, rub cleanser with
the grain to avoid streaking the surface. Rinse well, buff dry; polish with a glass
cleaner if necessary to remove cleanser residue and smudge marks.
Heavy soil, such as burned on food soil, can be removed by first cleaning as
per the instructions for moderate soil, Stubborn stains can be removed with
a damp Scotch-Brite scour-pad; rub evenly with the grain to avoid streaking
the surface. Rinse well, buff with dry cloth; polish with glass cleaner if necessary
to remove cleanser residue and smudge marks. Scotch-Brite is also useful in
buffing and removing minor scratches.
Stubborn food stains may also be removed by spraying with Easy-Off oven
cleaner. Allow to set overnight, then rinse, If stains remain, clean with recom-
mended cleansers such as Zud, Luneta (Jenn-Air Model A912, Part No. 712191),
or Scotch-Brite scour-pad. CAUTION: When using Easy-Off, avoid spraying areas
other than the stainless steel such as the air grille, control knob area, areas
around cooktop. Immediately wipe up any spray from these areas with a damp
cloth. Read the manufacturer's precautions on using oven cleaners. The caustic
materials in these products will discolor materials such as aluminum, brushed
or chrome plate. Hint: Easy-Off can be used to clean the porcelain burner basin
area.
23
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 50 51

Comments to this Manuals

No comments