Jenn-Air JJW2427DB User Manual download pdf (Page 14)

3-Wire Cable from Home Power Supply - U.S. Only

IMPORTANT: Use the 3-wire cable from home power supply

where local codes permit a 3-wire connection.

1. Connect the 2 black wires (C) together using

a UL listed wire connector.

2. Connect the 2 white wires (D) and the green (or bare) ground

wire (of the oven cable) using a UL listed wire connector.

3. Connect the 2 red wires (G) together using

a UL listed wire connector.

4. Install junction box cover.

Install Oven

1. Using 2 or more people, lift the oven partially into the

cabinet cutout. Use the oven opening as an area to grip.

NOTE: Push against seal area of the oven front frame

when pushing the oven into the cabinet. Do not push

against the outside edges.

2. Push against the seal area of the front frame to push

the oven into the cabinet until the back surface of the

front frame touches the front wall of the cabinet.

3. Push oven completely into the cabinet, and center

the oven into the cabinet cutout.

4. Remove the tape from black front trims.

■ Securely fasten the oven to the cabinet using

the #8-14 x ¾" screws provided.

■ Insert the screws through hole in black trim aligning

with hole in oven frame. Do not overtighten screws.

A. Cable from home power supply

B. Junction box

C. Black wires

D. White wires

E. Green (or bare) ground

wire (from oven)

F. 4-wire flexible conduit

from oven

G. Red wires

H. UL listed wire connectors

I. UL listed or CSA approved

conduit connector

A. Oven frame

B. Oven frame hole

C. Black trim piece

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Jenn-Air JJW2427DB User Manual Page 14