Jenn-Air JWD3030EX Installation Manual download pdf (Page 8)

3. It is recommended that if a wood or porous custom drawer

front is installed, a high-quality spray polyurethane ﬁnish be

applied to the inner wood surface.

4. For the lens, drill a

⁄

" (7.9 mm) diameter hole through the

appearance side of the custom drawer front. This hole will

allow the “ON” Indicator Light to be visible through the

custom drawer front. To secure the lens, use an adhesive

speciﬁed for plastic-to-wood application.

5. Install custom handle (not supplied) through custom

drawer front.

6. The custom drawer front is fastened to the stainless steel

drawer by driving 6 screws through clearance holes in the

drawer front into the wooden or other custom made panel.

A. Optional handle

B. Custom door panel

C.Warming drawer front

D. #8-18 x

" screws (6)

E. Lens

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Jenn-Air JWD3030EX Installation Manual Page 8