Jenn-Air W10141605 User Manual download pdf (Page 7)

Control Lock

The Control Lock turns off and disables all surface cooking areas

that are in use at the same time.

The Control Lock avoids unintended use of the surface cooking

areas. When the cooktop is locked out, the surface cooking areas

cannot be turned on by the cooktop touch controls.

To Lock Cooktop: Touch and hold CONTROL LOCK for

5 seconds. After 5 seconds, CONTROL LOCK will glow red,

indicating that the cooktop controls are in the lockout position.

To Unlock Cooktop: Touch and hold CONTROL LOCK for

5 seconds.

Performance Boost Function

This function allows you to increase the heat setting level above

the maximum heat setting 9 for 10 minutes or less.

NOTE: Performance boost function is not available on surface

cooking area 4.

To Use for Zones 1 and 3:

When a surface cooking area is set to the Performance boost

function no other surface cooking areas in that zone can be used.

If you attempt to use another surface cooking area in the same

zone, “P” and “9” will briefly flash in the display before returning

to heat setting level 9. The surface cooking area that was set to

the Performance boost function will automatically reset to heat

setting level 9.

1. Touch SELECT to turn on desired surface cooking area.

2. Set the surface cooking area heat setting level to 9.

3. Touch the “+” key. “P” will appear in the display.

4. Touch SELECT and the “-” key when finished. The “P” will no

longer be visible in the display, and the Performance boost

function will no longer be active. The surface cooking area

turns back to heat setting level 9.

To Use for Zone 2:

The Performance boost function “P” can only be activated in

surface cooking area 3. The pan size used must be smaller than

the inner surface cooking area (3) circle.

1. Touch SELECT to turn on surface cooking area.

2. Set the surface cooking area heat setting level to 9.

3. Touch the “+” key. “P” will appear in the display.

4. Touch SELECT and the “-” key when finished. The “P” will no

longer be visible in the display, and the Performance boost

function will no longer be active. The surface cooking area

turns back to heat setting level 9.

NOTE: The Performance boost function may automatically

deactivate to keep the internal electronic components of the

cooktop from becoming too hot.

Timer

Use the cooking timer to set times up to 99 minutes. The timer is

independent of any other control settings.

To Use:

1. Touch TIMER. “00” flashes, and the timer icon lights up in the

timer display.

2. Touch the “+” or “-” keys to set time.

If you touch the “+” key, “10 minutes” appears in the display.

If you touch the “-” key, “5 minutes” appears in the display.

Touch the “+” key to increase the time in 1-minute

increments.

Touch the “-” key to decrease the time in 1-minute

increments.

3. The timer will start to count down after a few seconds.

To change the time, touch the “Timer” key. When the timer

display flashes, reset the time with the “+” or “-” keys.

4. When the countdown is finished, the timer beeps for

10 seconds. “00” and the timer icon flash in the timer display.

Touch any key to stop.

NOTE: When the power is restored after an outage, the timer will

no longer be running.

Zone 1 Zone 2 Zone 3

A. Surface cooking

area 1

B. Surface cooking

area 2

C. Surface cooking

area 3

D. Surface cooking

area 4

E. Surface cooking

area 5

F. Surface cooking

area 6

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

Jenn-Air W10141605 User Manual Page 7

Comments to this Manuals

Related products and manuals for Cookers Jenn-Air W10141605